Blog 2017-11-17T14:28:07+00:00

Our Blog

LATEST NEWS AND REFERENCES

Oshkosh 2017 AirVenture Infusion Workshop with German Advanced Composites

Resin infusion workshop with products from German Advanced Composite.

As in past years, Innegra Technologies again spearheaded the Advanced Composite Infusion event during the show, a four-day demonstration overseen by Innegra’s Russ Emanis and conducted at the Replica Fighter Assn. tent. This year, Emanis and his team, volunteers from material sponsor

August 23rd, 2017|News|

Oshkosh 2016 AirVenture “Fly-In preview: Multi-day infusion demo with German Advanced Composites

Resin infusion workshop with products from German Advanced Composites

Once again visitors for the Experimental Aircraft Assn.’s (EAA) AirVenture 2016 this summer (July 25-31) will have the opportunity to attend a reprise of last year’s multi-day demonstration of infusion processing, again sponsored by Innegra Technologies and hosted by Innegra’s infusion expert

October 5th, 2016|News|

JHM Technologies

“Having now worked with the MTI® hose in repeated molding cycles, I can say that the MTI® technology brings a totally new level to “out of the Autoclave” molding quality in terms of void free laminates. MTI® hose creates an absolute barrier between the resin hydraulic pressure and the low

September 9th, 2015|Customers Voice, References|

Dynamic Composite Solutions – New distributor in Alaska.

We are proud to announce that we could win over DCS Dynamic Composite Solutions Composites as distribution partner. DCS is an Alaskan company seeking to further the role of composites in the technological solutions specific to the Alaskan environment. Whether they are designing, prototyping and helping to

March 8th, 2015|News|

ACP Composites – New distributor on the West Coast.

We are proud to announce that ACP Composites has started to sell the MTI products. Headquartered on the West Coast of the USA ACP Composites is a pioneer in composite technology, and they have been providing innovative solutions to their customers since 1985. ACP`s staff has a

February 20th, 2015|News|

North American Composites starts selling the MTI product range

We are proud to announce that NAC North American Composites has started to sell the MTI products. North American Composites (NAC) is a national distributor of composite raw materials and equipment from leading suppliers to the composites industry. NAC provides its customers with local service through its

December 12th, 2014|News|

Offshore Racing World Champions are crowned, Team Miss Geico wins its 8th World Championship

German Advanced Composites congratulates the great Miss Geico team for the win of its 8th World Championship title. We are proud to support this great team with the production of high-quality carbon fiber components. See a short video clip with the flying Miss Geico.

Key West, Fla. –

November 9th, 2014|News|

Momentive

“We used the MTI® hose to make several large parts for an important automotive customer. Using otherwise standard infusion equipment, the MTI® process allowed us to achieve a much higher laminate quality than we’d seen with standard VIP. We produced carbon fiber-epoxy parts that had excellent consolidation, zero voids and

November 2nd, 2014|References|

ABARIS “Road Tests” New MTI® Hose for Infusion

Jay Carpenter, one of the instructors for Abaris’ courses on Resin Infusion, has “road tested” the material to see how it actually performs.
“I was very pleased. When you use other styles of break zones (e.g. peel ply wrapped vac line) they will eventually wet out and you will start drawing

November 1st, 2014|References|